GFG-3015 Function Generator
 
 

 

GFG-3015 Function Generator

FEATURES:
  • Frequency Range 0.01Hz~15MHz
  • Max. Frequency Resolution 10mHz
  • Dual Display Indicate Frequency and Amplitude
  • Built-in 6-digit Counter with INT/EXT Function up to 150MHz High Resolution
  • Output Waveforms Sine, Square, Triangle, Ramp, Pulse, AM, FM, Sweep, Trigger and  
        Gate / Burst
  • VCF for 100:1 EXT Frequency Control
  • INT/EXT, AM/FM Modulation
  • GCV Output for Synchronization
  • Variable DC Offset Control
  • SYNC Output
  • LIN/LOG Sweep Mode
  • Output Overload Protection
  • RS-232C Interface Standard
 
     SPECIFICATIONS
      Main
      Output Waveforms Sine, Square, Triangle, ¡ÓRamp, Pulse, AM, FM, Sweep, Trigger, Gate, Burst
      Frequency Range 10mHz~15MHz in 8 Frequency Range (auto switch)
      Frequency Resolution 15MHz~150kHz(100Hz);1.5MHz~15kHz(10Hz); 150kHz~1.5kHz(1Hz);15kHz~150Hz(0.1Hz);1.5kHz~15Hz(10mHz); 150Hz~1.5Hz(10mHz);15Hz~0.15Hz(10mHz); 1.5Hz~0.01Hz(10mH)
      Frequency Accuracy 0.02% + 5 count
      Output Impedance 50Ω ¡Ó10%
      Amplitude Range 10.00V~0.01V(into 50Ω ) 4 amplitude ; |Vac peak|+|Vdc|=5V
Resolution: 10mV (10.00V~0.01V)
      Amplitude Accuracy ≦3%¡Ó 5 count at 10Hz~1MHz ; ≦10%¡Ó5count at 1MHz~15MHz
      Amplitude Unit Vpp, Vrms, dBm
      DC Offset -5V~+5V(into 50Ω ) ; Resolution 10mV
      DC Offset Accuracy ≦3%¡Ó 3 count at amplitude min.
      Duty Control 80%:20%:80% to 1MHz ; Resolution 1%
      Duty Accuracy ≦1% ~ 1MHz at 50% duty
      Display Dual Display for Frequency 6 digits and Amplitude 4 digits

      Sine Wave  
      Distortion ≦ 0.5%(-46dB) THD from 10Hz to 100kHz ;
≦-30dBc to 15MHz (spec. applied form 1Vpp~10Vpp)

      Triangle Wave
      Linear Error <1% of full scale output at 100Hz

      Square Wave
      Asymmetry
¡Ó1% of period + 3ns
      Rise or Fall Time < 18nS

      SYNC Output
      Impedance 50Ω±10%
      Level > 1Vpp open circuit

      Modulation Characteristics
      Types AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type)
      Waveform Sine, square, triangle, ramp or Variable Symmetry Pulse
      Rate Frequency Range 10mHz~10kHz in 3 Frequency Range (auto switch)
      Rate Frequency    
      Accuracy
5% ¡Ó1 count
      Rate Frequency   
      Resolution
10.0kHz~0.1kHz(100Hz);
99Hz~1Hz(0.1Hz);
0.99Hz~0.01Hz(0.01Hz)
      Symmetry 90%:10%:90% ; Resolution: 1%
      Symmetry Accuracy ¡Ó1 count (≦¡Ó1%)
      Output Level ≧1Vp-p into 10KΩ load
      Sine Wave Distortion ≦1% from 10Hz to 10kHz

      Amplitude Modulation
      Depth 0~100%
      Modulation Frequency
      Rate
0.01Hz~10kHz(INT) DC~1MHz(EXT)
      Carries ¡V3dB
      Bandwidth
<100Hz to >5MHz
      External Sensitivity ≦10Vp-p for 100% modulation

      Frequency Modulation
      Deviation 0 ~ ¡Ó5%
      Modulation Frequency
      Rate
0.01Hz~10kHz(INT) DC~50kHz(EXT)
      External Sensitivity ≦5Vpp for 15% deviation

      Sweep Characteristics
      Sweep Range 15MHz~150kHz ; 1.5MHz~15kHz ; 150kHz~1.5kHz ; 15kHz~150Hz ; 1.5kHz~15Hz ; 150Hz~1.5Hz ; 15Hz~0.15Hz ; 1.5Hz~0.01Hz
      Width >100:1 (in same frequency range)
      Rate 0.01Hz~10kHz
      Symmetry Control 90%:10%:90% ; Resolution: 1%
      Mode Linear / Log sweep
      Sweep output 0 to ≧-5Vp-p into 10KΩ

      Trigger Characteristics
      Start/Stop Phase      
      Range
80¢X~90¢X
      Rate 0.1Hz~10kHz
      Frequency Range 0.1Hz~1MHz(Useful to 10MHz)
      Ext TRIG Frequency
      Range
DC to 1MHz,TTL compatible input level
      Gate or Burst Implement by trigger setting

      VCF
      Range 100:1(0 to 10V¡Ó1)
      Input Linearity <0.5% to 1MHz,<5% to 10MHz
      Input Impedance 10kΩ

      GCV Output
  To set the voltage between 0.2V to 2V as per different Frequency

      Frequency Counter
      INT/EXT Switch Selector
      Range 5Hz~150MHz EXT
      Accuracy Time base accuracy ¡Ó1count
      Time Base ¡Ó20ppm(23℃¡Ó5℃) after 30 minutes warm up
      Resolution The maximum resolution is 100nHz for 1Hz and 0.1Hz for 100MHz
      Input Impedance 1MΩ // 150pF
      Sensitivity ≦35Vrms(5~100MHz);≦45Vrms(100MHz~150MHz)

      Memory  
      Save/Recall 10 Sets of front panel setting memories

      Interface RS-232C

      Power Source AC 115V/230V±15%, 50/60Hz

      Accessories Power cord ¡Ñ 1,
Instruction manual ¡Ñ 1,
GTL-101 ¡Ñ 2

      Dimensions & Weight 290(W) ¡Ñ 142(H) ¡Ñ 460(D) mm, Approx. 5 kg

 

 
 
Products list | brand | Model No. | Home